Back to List

Bare Die Data Sheet: 78L05AC REV 2

The 78L05AC is a size optimized 5V fixed 3-terminal voltage regulator with 5% output voltage tolerance guaranteed. The device delivers 100mA of output current & is equipped with internal limiting + thermal shutdown features for overload immunity.
Optimized die size suits applications requiring 5V regulation within smallest footprint.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • 4% voltage output tolerance over full temperature range
  • Wide input voltage range
  • Internal Short-Circuit Current Limiting
  • Internal Thermal Overload Protection
  • No external components required
  • Provides Point-of-Source regulation with lower noise
  • x2 magnitude impedance improvement with lower bias current and noise when replacing Zener diode/resistor combinations
  • Can be used with power-pass elements to make high-current voltage regulators
  • Negative Voltage complement is 79L05AC
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.416mm² (644.802mil²)
X: 640µm (25mil)
Y: 650µm (26mil)
  Request Pad Layout

In Stock: Available on request
Product Families: Used for this device are tabulated below.
Functional:
  • Output: Fixed Output
  • Output Capacitor: Cap Free, Non-Ceramic
Specification:
VIN (MIN): 7.00V
VIN (MAX): 20.00V
IOUT (MAX): 0.10A
VOUT (MIN): 4.80V
VOUT (MAX): 5.20V
VDO: 1,700mV
Accuracy: 4.0%
IQ: 1.9000mA
Noise Figure: 42µVrms
PSRR @ 100KHz:   n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.